| Product Selection
Guide |
| Product
|
Installation
Methods |
Base
Materials |
Description |
 |
Molded-In
Epoxied-In |
Thermoset
Plastics Thermoplastics Rubber
Ceramics |
STANDARDIZED
MOLDED-IN INSERTS
A wide range of threaded inserts featuring patented designs for molded-in
use. Close tolerance of minor thread diameter and careful burnishing
of inner thread crests assure snug fit on pins. Extremely flat ends
on inserts (with no burrs, ridges or other defects) mean no leakage
of material on the face of the mold.
Available in Brass, Aluminum and Stainless Steel |
 |
Molded-In
Epoxied-In |
Thermoset
Plastics Thermoplastics Rubber
Ceramics |
STUDDED
MOLDED-IN INSERTS
Threaded stud inserts featuring patented designs for molded-in use.
Proportioned for maximum holding strength. Can be screwed to butt
flush with a Yardley Type C Insert.
Available in Brass |
 |
Pressed-In
Epoxied-In |
Thermoset
Plastics Thermoplastics Rubber |
STANDARDIZED
PRESSED-IN INSERTS
Spiral knurled, open or closed-ended inserts for pressing into soft
materials such as plastics, foamed plastics and rubber. Ideal for
use where minimal pull-out strength is needed, but some torque resistance
is required. Can also be molded-in and feature patented I.D. design
for use with locating pins.
Available in Brass and Aluminum |
 |
Pressed-In
Ultrasonic
Thermal |
Thermoset
Plastics Thermoplastics Wood |
SHARP-SERT
Versatile, economical and trouble free, they offer easy, high-speed
installation. Curved hooks and lateral flutes lock them into plastics,
particle board and wood. Install with ultrasonic or thermal tools
or just hammer or press them in.
Available in Brass |
 |
Threaded-In |
Thermoset
Plastics Thermoplastics Wood Soft Metals |
TRISERT
For strong threads in plastics, soft metals and wood. Self-tapping,
they provide high torque and pull-out resistance. Install with Yardley
pneumatic inserter or insert driver.
Available in Brass, Plated Steel and Stainless Steel (Coarse Series
in Brass Only) |
 |
Ultrasonic
Thermal |
Thermoplastics
ABS Polycarbonates |
INTRO-SERT
For use in thermoplastic materials such as ABS and polycarbonates.
Intro-Serts have no sharp edges on their outer annular ribs to cause
residual stress cracking. Install them fast and easily with ultrasonic
or thermal insertion tools.
Available in Brass, Aluminum and Stainless Steel |
 |
Threaded-In |
Wood
Particle Board ABS
Foamed Plastics |
FIBER-SERT
Special design makes them ideal for wood, particle
board, ABS and foamed plastics. Large coarse outer threads give great
holding power in weaker materials while inside threads stay clean,
free of chips. Install with Yardley pneumatic inserter or easy-to-use
self-tapping driver.
Available in Brass and Diecast |
 |
Pressed-In |
Aluminum
Soft Metals |
QUICK-SERT
Designed for fast easy press-in installation, providing permanent
threads in aluminum and other soft metals. Its smooth tapered lead
allows easy positioning for quick starts in a pre-drilled hole and
the knurled body locks tightly in the host material. Its thick wall
design prevents thread distortion. Available in Plated Steel |
 |
Molded-In |
Thermoset
Plastics Thermoplastics Glass-filled Plastics |
BI-SERT
INSERTS
Specifically designed for the Rotational Molding process, this versatile
insert provides exceptional torque and pull-out resistance. Unique
Hex design allows the Bi-Sert to be used with fibrous materials where
the fibers would normally block the flow of the plastic material around
ordinary diamond knurled inserts. Inside diameter held to strict tolerances
for a smooth, tight fit on locating pins.
Available in Brass |
 |
Ultrasonic
Thermal
Molded-In |
Thermoset
Plastics
Thermoplastics |
ZAP-SERT
DOUBLE ENDED INSERTS
Economical design features a lead on both ends making this insert ideal
for high volume, automated production. Unique radial barbs provide
strong resistance to pull-out and rotation in plastics and thermoplastics.
Can be molded-in or installed with ultrasonic or thermal insertion
tools.
Available in Brass |
