FLEX-5S W/FL5-HS-M4 | FLEX 5S W/ M4 HEADSET

FLEX-5S W/FL5-HS-M4
FLEX 5S W/ M4 HEADSET

FLEX-5S: The Sherex FLEX-5S utilizes a Pull to Stroke method of installation. This method allows the insert installed to the same distance time. This is helpful when installing into soft materials (prevents crushing of the base materials) or when a specific Installed Length is required. Installs Rivet Nuts from: M3-M10 and 4-40-3/8-16. Push to start nose piece to spin on fastener, and single stage trigger with automatic reverse with manual reverse bypass. Quick change mandrel design. Light weight (4.2 lbs.). Can be suspended from a balancer. Socket head cap screw mandrel. Installs Rivet Nut Studs from M5-M8 and 10-24-5/16-24. Available in an in-line version with split tool available (remote booster for lighter tool). Upgradeable to process monitoring. 5,000 lbs. (22 KN) pulling force at 90 psi and a 7 mm (0.276 in.) of available stroke. 2-3 second cycle time. All aluminum design for improved durability.