P116-447-06 | Ball Studs P116, 0.447 in. Height, 0.187 Thread

  • Call for Price
  • Out of Stock
  • Available Only in Quantities of: 1
  • Log in to see if custom discounts apply
Ball Studs P116, 0.447 in. Height, 0.187 Thread
Click image to enlarge
Ball Studs P116, 0.447 in. Height, 0.187 Thread

P116-447-06
Ball Studs P116, 0.447 in. Height, 0.187 Thread

  • Call for Price
  • UM : M
Tinnerman ball-stud fasteners were originally developed as spring catch fasteners on aircraft access doors, inspection panels, sealing strips and other similar assemblies requiring repeated disengagement. Their versatility soon found them used extensively in other fields where they secured kitchen cabinet doors, removable toe plates, electronic cabinets, protective covers, etc. There is no direct contact between the stud and panel on surfaces which eliminates wear or chipping of painted or porcelain surfaces and resulting corrosion. When latched, spring legs of the clip continually bear inward on the spherical or serrated studs, holding latched unit snug against the panel. Where adjustability or wide latching ranges are required, the serrated stud is used. They are mainly used for attaching compressional materials such as rubber, fabric insulation, etc. Ball-Stud Speed Clip Fastener application: The Speed Clip is riveted in position on the panel with either plain or 100 degree counter-sunk head rivets, the Ball-Stud is riveted, or screwed into the mating panel. The panels are snapped together, owing to the resiliency of the spring legs, misalignment resulting from a normal amount of manufacturing tolerances can be readily absorbed.
Product Specifications
Height (Ref.) 0.447
Thread Length 0.187
Hex Width 0.25
Height to Center of Ball ("A") 0.354
Panel Thickness (min/max) 0.052/0.078
Body Diameter (minor/major) 0.156/0.187
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our Privacy Policy and Terms of Use.